Seeed Studio SenseCAP Solar Node P1-Pro
Official Active
Seeed Studio Solar-powered Meshtastic/MeshCore node or repeater with built-in XIAO L76K GNSS and four pre-installed 3350 mAh 18650 batteries. Same XIAO nRF52840 Plus and Wio-SX1262 core as the P1, plus a 5W solar panel and IPX6 outdoor enclosure with Grove expansion port.
~$96 approx.· 2026-06
References: mesh-sn.de ↗
- MCU
- nRF52840
- Radio
- SX1262
- Display
- None
- GPS
- Quectel L76K
- Battery
- 13400 mAh
- Connectivity
- USB, BLE
Roles
CompanionRepeaterRoom Server
Transports
bleusb
Other variants
Compare all 2 →Hardware
Radio
- Technology
- LORA
- Chip
- Semtech SX1262 ↗
- Frequency
- 868 MHz,915 MHz
- TX power
- 22 dBm
- TX efficiency
- 1.86 mW/mA
- Antenna
- 2dBi rod
Processor
- Family
- Nordic nRF52 series ↗
- Model
- Nordic nRF52840 ↗
- Architecture
- ARM Cortex-M4
- Flash
- 1 MB
- RAM
- 256 KB
Input
- Button
- power button
- Button
- reset button
- Button
- user-defined button
GNSS
- Chip
- Quectel L76K ↗
Expansion
- Connector
- Grove (I2C, GPIO, UART)
Physical
Connectivity
- USB
- USB-C
- USB modes
- Power, Serial, Flashing
- Bluetooth
- BLE 5.0
- Wi-Fi
- None
Firmware support
| Firmware | Type | Target | Status | Notes |
|---|---|---|---|---|
| MeshCore (Official) | Official | sensecap_solar | ✓ Supported | |
| MeshCoreNG | Fork | sensecap_solar | ✓ Supported | |
| ZephCore | Custom | — | ✓ Supported |