Meshcomod
ForkA multi-transport companion firmware built on MeshCore that exposes USB, Bluetooth and TCP connectivity simultaneously, so phones, web clients and Home Assistant can all talk to one radio at once. Adds runtime Wi-Fi config and an on-device UI.
Fork of MeshCore (Official)
- Maintainer
- ALLFATHER-BV ↗
- Status
- active
- Maturity
- stable
- Lifecycle
- active
- Latest version
- 1.16.0.4
- Released
- 2026-06-16
- Runtime
- Arduino · C++
- Distribution
- community
- License
- MIT
Capabilities
Transports
- ✓ BLE
- ✓ USB serial
- ✓ Native TCP
- ✓ Wi-Fi AP
Operations
- ✕ Web flasher
- ✓ OTA updates
Networking
- ✓ Repeater
- ✓ Room server
- ✕ Observer
- ✕ KISS modem
Hardware
- ✓ GPS
- ✓ Display
- ✕ Sensors
- ✕ Low-power RX
Protocol
- ✓ MeshCore compatible
Node roles
companionrepeaterroom-server
Features
- Simultaneous USB + BLE + TCP connections
- Real-time push to all connected clients
- Home Assistant sidebar integration
- Runtime Wi-Fi configuration (no CLI recovery)
- On-device UI tabs (BLE pairing, TCP status)
Project signals
popularity 2026-06-21 verification 2026-06-21
- GitHub stars
- 62
- Forks
- 6
- Watchers
- 5
- Open issues
- 4
- Contributors
- 151
- Release downloads
- 144
- Latest downloads
- 38
- Source available
- Yes
- Releases available
- Yes
- CI builds
- Yes
Releases
from GitHub · updated 2026-06-21v1.16.0.4 # Latest 5 days ago · 2026-06-16 19:39 UTC
v1.16.0.3 # 6 days ago · 2026-06-15 10:44 UTC
v1.16.0.2 # 7 days ago · 2026-06-14 06:32 UTC
Device compatibility (6)
✓ 6 Supported
| Device | MCU | Radio | Status | Notes |
|---|---|---|---|---|
| Heltec V4 | esp32-s3 | Semtech SX1262 | ✓ Supported | |
| Heltec V4 + Expansion Kit (Touch) | esp32-s3 | Semtech SX1262 | ✓ Supported | |
| Heltec V3 | esp32-s3 | Semtech SX1262 | ✓ Supported | |
| Heltec WSL3 | esp32-s3 | Semtech SX1262 | ✓ Supported | |
| Heltec Wireless Paper | esp32-s3 | Semtech SX1262 | ✓ Supported | |
| Seeed Studio Xiao S3 WIO | esp32-s3 | Semtech SX1262 | ✓ Supported |