LilyGo T-Beam Supreme (SX1262)
Official Active
LilyGO ESP32-S3 + SX1262 LoRa tracker with L76K GNSS, SH1106 OLED, and a rich sensor suite (QMI8658 IMU, QMC6310 magnetometer, BME280, PCF8563 RTC). AXP2101 power management, M.2 socket, and micro-SD expansion. USB-C with CH9102 bridge.
~$40 approx.· 2026-06
References: mesh-sn.de ↗
- MCU
- ESP32-S3
- Radio
- SX1262
- Display
- 1.13″ OLED
- GPS
- Quectel L76K
- Battery
- External
- Connectivity
- USB, BLE, Wi-Fi
Roles
CompanionRepeaterRoom ServerStandalone Ui
Transports
bleusbwifi
Other variants
Compare all 4 →
Hardware
Radio
- Technology
- LORA
- Chip
- Semtech SX1262 ↗
- Frequency
- 868 MHz,915 MHz
- TX power
- 22 dBm
- Antenna
- IPEX-1.0
Processor
- Family
- Espressif ESP32 series ↗
- Model
- Espressif ESP32-S3 ↗
- Architecture
- Xtensa LX
- Flash
- 8 MB
- RAM
- 512 KB
- PSRAM
- 8 MB
Input
- Button
- PWR/PMU button (power on/off, customizable)
- Button
- BOOT button (boot mode, customizable)
GNSS
- Chip
- Quectel L76K ↗
Battery
- Battery
- External connector
- Built-in
- No
- Charging
- Yes
- Connector
- JST + 18650 Holder
Power
- PMIC
- AXP2101
Solar
- Solar charging
- Supported
Expansion
- Port 1
- M.2 (USB, UART, I2C, GPIO)
- Port 2
- Qwiic (I2C)
- Port 3
- Micro SD
Physical
Connectivity
- USB
- USB-C
- USB bridge
- CH9102
- USB modes
- Power, Serial, Flashing
- Bluetooth
- BLE 5.0
- Wi-Fi
- 802.11 b/g/n
Firmware support
| Firmware | Type | Target | Status | Notes |
|---|---|---|---|---|
| MeshCore (Official) | Official | lilygo_tbeam_supreme_SX1262 | ✓ Supported | |
| MeshCoreNG | Fork | lilygo_tbeam_supreme_SX1262 | ✓ Supported |