Seeed Studio Wio Tracker L1 Pro
Official Active
Seeed Studio Ready-to-use Meshtastic/MeshCore handheld with the same L1 board inside a durable enclosure, 1.3-inch OLED, built-in 2000 mAh battery, 4-way joystick, and L76K GNSS. Supports USB-C and solar charging.
~$43 approx.· 2026-06
References: mesh-sn.de ↗
- MCU
- nRF52840
- Radio
- SX1262
- Display
- 1.3″ OLED
- GPS
- Quectel L76K
- Battery
- 2000 mAh
- Connectivity
- USB, BLE
Roles
CompanionRepeaterRoom ServerStandalone Ui
Transports
bleusb
Other variants
Compare all 3 →
Hardware
Radio
- Technology
- LORA
- Chip
- Semtech SX1262 ↗
- Frequency
- 862-930MHz
Processor
- Family
- Nordic nRF52 series ↗
- Model
- Nordic nRF52840 ↗
- Architecture
- ARM Cortex-M4
- Flash
- 1 MB
- RAM
- 256 KB
Input
- Joystick
- 4-way
GNSS
- Chip
- Quectel L76K ↗
Solar
- Solar charging
- Supported
Physical
Connectivity
- USB
- USB-C
- USB modes
- Power, Serial, Flashing
- Bluetooth
- BLE 5.0
- Wi-Fi
- None
Firmware support
| Firmware | Type | Target | Status | Notes |
|---|---|---|---|---|
| MeshCore (Official) | Official | wio-tracker-l1 | ✓ Supported | |
| MeshCore Solo | Fork | wio-tracker-l1 | ✓ Supported | OLED variant — same firmware target as wio-tracker-l1 |
| MeshCoreNG | Fork | wio-tracker-l1 | ✓ Supported | |
| ZephCore | Custom | — | ✓ Supported |