Wio Tracker L1

Name: Wio Tracker L1
Brand: Seeed Studio
Price: 33 USD

In flasher Active

Low-power Meshtastic/MeshCore dev board with LoRa, L76K GNSS, a 1.3-inch OLED status display, and 4-way joystick. Supports USB-C, solar, and external Li-ion battery via JST connector. Board only — no integrated battery or enclosure.

~$33 approx (2026-06)

Product page ↗

MCU: nRF52840
Radio: SX1262
Display: 1.3″ OLED
GPS: Quectel L76K
Battery: External
Connectivity: USB, BLE

Roles

CompanionRepeaterRoom serverStandalone UI

Transports

bleusb

Other models

Compare all 3 →

Wio Tracker L1 E-ink nrf52840· Semtech SX1262

Wio Tracker L1 Pro nrf52840· Semtech SX1262

Variants

Purchasable options for this device

Revision	Variant	Band	SKU
—	862–930MHz	IN865 EU868 US915 / AU915 KR920 AS923	114993648

Hardware

Radio

Technology: LORA
Chip: Semtech SX1262 ↗
Band: IN865 EU868 US915 / AU915 KR920 AS923

Processor

Family: Nordic nRF52 series ↗
Model: Nordic nRF52840 ↗
Architecture: ARM Cortex-M4
Flash: 1 MB
RAM: 256 KB

Display

Type: OLED
Controller: SH1106
Size: 1.3″
Resolution: 128 × 64
Colors: Monochrome

Input

Joystick: 4-way

GNSS

Chip: Quectel L76K ↗

Battery

Battery: External connector
Chemistry: Li-ion
Built-in: No
Charging: Yes
Connector: JST 1.0mm Li-ion

Power

Power draw (idle): 5 mA
Power draw (TX): 85 mA

Solar

Solar charging: Supported

Physical

LEDs: Status LEDs
Shell: None

Connectivity

USB: USB-C
USB modes: Power, Serial, Flashing
Bluetooth: BLE 5.0
Wi-Fi: None

Details

Kind: Product
Lifecycle: Active
Family: seeed-wio-tracker-l1
Firmware support: 6
Catalog completeness: 76 %

Firmware support

Firmware	Type	Target	Status	Notes
MeshCore (Reference)	Reference	wio-tracker-l1	✓ Supported
ZephCore	Custom	—	✓ Supported
MeshCore mishmesh	Fork	wio-tracker-l1	✓ Supported	Also supported; E-ink support is planned for future versions.
MeshCore Solo	Fork	wio-tracker-l1	✓ Supported	OLED variant (SSD1306/SH1106 128x64)
FieldMesh	Fork	wio-tracker-l1	✓ Supported	OLED display (SSD1306/SH1106 128x64), joystick; text input and send supported
MeshCoreNG	Fork	wio-tracker-l1	✓ Supported

3D-printed enclosures

Full housings you can print yourself

111

Wio Tracker L1 Pro for Meshtastic Enclosure Casing by Seeed Studio Printables ↗

Wio Tracker L1 Case (FDM compatible) by Jckf MakerWorld ↗

Wio Tracker L1 Pro PLUS Case by austin g Printables ↗

Wio Tracker L1 Case with Integrated Clip + 3000 mAh Battery by Woogies Printables ↗

Seeed Wio Tracker L1 OLED Enclosure by Bistro Printables ↗